Supported Fields for Conditions and Outputs

Events fields that you can use in conditions and outputs of Falco Rules

Here are the fields supported by Falco. These fields can be used in the condition key of a Falco rule and well as the output key. Any fields included in the output key of a rule will also be included in the alert's output_fields object when json_output is set to true.

You can also see this set of fields via falco --list=<source>, with <source> being one of the supported sources.

System Calls (source `syscall`)

syscall event source fields are provided by the Falco Drivers.

# System Kernel Fields
$ falco --list=syscall

Field Class: evt

These fields can be used for all event types

Name	Type	Description
`evt.num`	UINT64	event number.
`evt.time`	CHARBUF	event timestamp as a time string that includes the nanosecond part.
`evt.time.s`	CHARBUF	event timestamp as a time string with no nanoseconds.
`evt.time.iso8601`	CHARBUF	event timestamp in ISO 8601 format, including nanoseconds and time zone offset (in UTC).
`evt.datetime`	CHARBUF	event timestamp as a time string that includes the date.
`evt.datetime.s`	CHARBUF	event timestamp as a datetime string with no nanoseconds.
`evt.rawtime`	ABSTIME	absolute event timestamp, i.e. nanoseconds from epoch.
`evt.rawtime.s`	ABSTIME	integer part of the event timestamp (e.g. seconds since epoch).
`evt.rawtime.ns`	ABSTIME	fractional part of the absolute event timestamp.
`evt.reltime`	RELTIME	number of nanoseconds from the beginning of the capture.
`evt.reltime.s`	RELTIME	number of seconds from the beginning of the capture.
`evt.reltime.ns`	RELTIME	fractional part (in ns) of the time from the beginning of the capture.
`evt.pluginname`	CHARBUF	if the event comes from a plugin, the name of the plugin that generated it. The plugin must be currently loaded.
`evt.plugininfo`	CHARBUF	if the event comes from a plugin, a summary of the event as formatted by the plugin. The plugin must be currently loaded.

Field Class: evt (for system calls)

Event fields applicable to syscall events. Note that for most events you can access the individual arguments/parameters of each syscall via evt.arg, e.g. evt.arg.filename.

Name	Type	Description
`evt.latency`	RELTIME	delta between an exit event and the correspondent enter event, in nanoseconds.
`evt.latency.s`	RELTIME	integer part of the event latency delta.
`evt.latency.ns`	RELTIME	fractional part of the event latency delta.
`evt.latency.human`	CHARBUF	delta between an exit event and the correspondent enter event, as a human readable string (e.g. 10.3ms).
`evt.deltatime`	RELTIME	delta between this event and the previous event, in nanoseconds.
`evt.deltatime.s`	RELTIME	integer part of the delta between this event and the previous event.
`evt.deltatime.ns`	RELTIME	fractional part of the delta between this event and the previous event.
`evt.dir`	CHARBUF	event direction can be either '>' for enter events or '<' for exit events.
`evt.type`	CHARBUF	The name of the event (e.g. 'open').
`evt.type.is`	UINT32	allows one to specify an event type, and returns 1 for events that are of that type. For example, evt.type.is.open returns 1 for open events, 0 for any other event.
`syscall.type`	CHARBUF	For system call events, the name of the system call (e.g. 'open'). Unset for other events (e.g. switch or internal events). Use this field instead of evt.type if you need to make sure that the filtered/printed value is actually a system call.
`evt.category`	CHARBUF	The event category. Example values are 'file' (for file operations like open and close), 'net' (for network operations like socket and bind), memory (for things like brk or mmap), and so on.
`evt.cpu`	INT16	number of the CPU where this event happened.
`evt.args`	CHARBUF	all the event arguments, aggregated into a single string.
`evt.arg`	CHARBUF	one of the event arguments specified by name or by number. Some events (e.g. return codes or FDs) will be converted into a text representation when possible. E.g. 'evt.arg.fd' or 'evt.arg[0]'.
`evt.rawarg`	DYNAMIC	one of the event arguments specified by name. E.g. 'evt.rawarg.fd'.
`evt.info`	CHARBUF	for most events, this field returns the same value as evt.args. However, for some events (like writes to /dev/log) it provides higher level information coming from decoding the arguments.
`evt.buffer`	BYTEBUF	the binary data buffer for events that have one, like read(), recvfrom(), etc. Use this field in filters with 'contains' to search into I/O data buffers.
`evt.buflen`	UINT64	the length of the binary data buffer for events that have one, like read(), recvfrom(), etc.
`evt.res`	CHARBUF	event return value, as a string. If the event failed, the result is an error code string (e.g. 'ENOENT'), otherwise the result is the string 'SUCCESS'.
`evt.rawres`	INT64	event return value, as a number (e.g. -2). Useful for range comparisons.
`evt.failed`	BOOL	'true' for events that returned an error status.
`evt.is_io`	BOOL	'true' for events that read or write to FDs, like read(), send, recvfrom(), etc.
`evt.is_io_read`	BOOL	'true' for events that read from FDs, like read(), recv(), recvfrom(), etc.
`evt.is_io_write`	BOOL	'true' for events that write to FDs, like write(), send(), etc.
`evt.io_dir`	CHARBUF	'r' for events that read from FDs, like read(); 'w' for events that write to FDs, like write().
`evt.is_wait`	BOOL	'true' for events that make the thread wait, e.g. sleep(), select(), poll().
`evt.wait_latency`	RELTIME	for events that make the thread wait (e.g. sleep(), select(), poll()), this is the time spent waiting for the event to return, in nanoseconds.
`evt.is_syslog`	BOOL	'true' for events that are writes to /dev/log.
`evt.count`	UINT32	This filter field always returns 1 and can be used to count events from inside chisels.
`evt.count.error`	UINT32	This filter field returns 1 for events that returned with an error, and can be used to count event failures from inside chisels.
`evt.count.error.file`	UINT32	This filter field returns 1 for events that returned with an error and are related to file I/O, and can be used to count event failures from inside chisels.
`evt.count.error.net`	UINT32	This filter field returns 1 for events that returned with an error and are related to network I/O, and can be used to count event failures from inside chisels.
`evt.count.error.memory`	UINT32	This filter field returns 1 for events that returned with an error and are related to memory allocation, and can be used to count event failures from inside chisels.
`evt.count.error.other`	UINT32	This filter field returns 1 for events that returned with an error and are related to none of the previous categories, and can be used to count event failures from inside chisels.
`evt.count.exit`	UINT32	This filter field returns 1 for exit events, and can be used to count single events from inside chisels.
`evt.around`	UINT64	Accepts the event if it's around the specified time interval. The syntax is evt.around[T]=D, where T is the value returned by %evt.rawtime for the event and D is a delta in milliseconds. For example, evt.around[1404996934793590564]=1000 will return the events with timestamp with one second before the timestamp and one second after it, for a total of two seconds of capture.
`evt.abspath`	CHARBUF	Absolute path calculated from dirfd and name during syscalls like renameat and symlinkat. Use 'evt.abspath.src' or 'evt.abspath.dst' for syscalls that support multiple paths.
`evt.is_open_read`	BOOL	'true' for open/openat/openat2/open_by_handle_at events where the path was opened for reading
`evt.is_open_write`	BOOL	'true' for open/openat/openat2/open_by_handle_at events where the path was opened for writing
`evt.is_open_exec`	BOOL	'true' for open/openat/openat2 or creat events where a file is created with execute permissions

Field Class: process

Additional information about the process and thread executing the syscall event.

Name	Type	Description
`proc.pid`	INT64	the id of the process generating the event.
`proc.exe`	CHARBUF	the first command line argument (usually the executable name or a custom one).
`proc.name`	CHARBUF	the name (excluding the path) of the executable generating the event.
`proc.args`	CHARBUF	the arguments passed on the command line when starting the process generating the event.
`proc.env`	CHARBUF	the environment variables of the process generating the event.
`proc.cmdline`	CHARBUF	full process command line, i.e. proc.name + proc.args.
`proc.exeline`	CHARBUF	full process command line, with exe as first argument, i.e. proc.exe + proc.args.
`proc.cwd`	CHARBUF	the current working directory of the event.
`proc.nthreads`	UINT32	the number of threads that the process generating the event currently has, including the main process thread.
`proc.nchilds`	UINT32	the number of child threads that the process generating the event currently has. This excludes the main process thread.
`proc.ppid`	INT64	the pid of the parent of the process generating the event.
`proc.pname`	CHARBUF	the name (excluding the path) of the parent of the process generating the event.
`proc.pcmdline`	CHARBUF	the full command line (proc.name + proc.args) of the parent of the process generating the event.
`proc.apid`	INT64	the pid of one of the process ancestors. E.g. proc.apid[1] returns the parent pid, proc.apid[2] returns the grandparent pid, and so on. proc.apid[0] is the pid of the current process. proc.apid without arguments can be used in filters only and matches any of the process ancestors, e.g. proc.apid=1234.
`proc.aname`	CHARBUF	the name (excluding the path) of one of the process ancestors. E.g. proc.aname[1] returns the parent name, proc.aname[2] returns the grandparent name, and so on. proc.aname[0] is the name of the current process. proc.aname without arguments can be used in filters only and matches any of the process ancestors, e.g. proc.aname=bash.
`proc.loginshellid`	INT64	the pid of the oldest shell among the ancestors of the current process, if there is one. This field can be used to separate different user sessions, and is useful in conjunction with chisels like spy_user.
`proc.duration`	RELTIME	number of nanoseconds since the process started.
`proc.fdopencount`	UINT64	number of open FDs for the process
`proc.fdlimit`	INT64	maximum number of FDs the process can open.
`proc.fdusage`	DOUBLE	the ratio between open FDs and maximum available FDs for the process.
`proc.vmsize`	UINT64	total virtual memory for the process (as kb).
`proc.vmrss`	UINT64	resident non-swapped memory for the process (as kb).
`proc.vmswap`	UINT64	swapped memory for the process (as kb).
`thread.pfmajor`	UINT64	number of major page faults since thread start.
`thread.pfminor`	UINT64	number of minor page faults since thread start.
`thread.tid`	INT64	the id of the thread generating the event.
`thread.ismain`	BOOL	'true' if the thread generating the event is the main one in the process.
`thread.exectime`	RELTIME	CPU time spent by the last scheduled thread, in nanoseconds. Exported by switch events only.
`thread.totexectime`	RELTIME	Total CPU time, in nanoseconds since the beginning of the capture, for the current thread. Exported by switch events only.
`thread.cgroups`	CHARBUF	all the cgroups the thread belongs to, aggregated into a single string.
`thread.cgroup`	CHARBUF	the cgroup the thread belongs to, for a specific subsystem. E.g. thread.cgroup.cpuacct.
`thread.vtid`	INT64	the id of the thread generating the event as seen from its current PID namespace.
`proc.vpid`	INT64	the id of the process generating the event as seen from its current PID namespace.
`thread.cpu`	DOUBLE	the CPU consumed by the thread in the last second.
`thread.cpu.user`	DOUBLE	the user CPU consumed by the thread in the last second.
`thread.cpu.system`	DOUBLE	the system CPU consumed by the thread in the last second.
`thread.vmsize`	UINT64	For the process main thread, this is the total virtual memory for the process (as kb). For the other threads, this field is zero.
`thread.vmrss`	UINT64	For the process main thread, this is the resident non-swapped memory for the process (as kb). For the other threads, this field is zero.
`proc.sid`	INT64	the session id of the process generating the event.
`proc.sname`	CHARBUF	the name of the current process's session leader. This is either the process with pid=proc.sid or the eldest ancestor that has the same sid as the current process.
`proc.tty`	INT32	The controlling terminal of the process. 0 for processes without a terminal.
`proc.exepath`	CHARBUF	The full executable path of the process.
`proc.vpgid`	INT64	the process group id of the process generating the event, as seen from its current PID namespace.
`proc.is_container_healthcheck`	BOOL	true if this process is running as a part of the container's health check.
`proc.is_container_liveness_probe`	BOOL	true if this process is running as a part of the container's liveness probe.
`proc.is_container_readiness_probe`	BOOL	true if this process is running as a part of the container's readiness probe.
`proc.is_exe_writable`	BOOL	true if this process' executable file is writable by the same user that spawned the process.
`thread.cap_permitted`	CHARBUF	The permitted capabilities set
`thread.cap_inheritable`	CHARBUF	The inheritable capabilities set
`thread.cap_effective`	CHARBUF	The effective capabilities set
`proc.cmdnargs`	UINT64	The number of cmd args.
`proc.cmdlenargs`	UINT64	The total count of characters / length of all cmd args combined excluding whitespaces.
`proc.pvpid`	INT64	the id of the parent process generating the event as seen from its current PID namespace.
`proc.is_exe_upper_layer`	BOOL	true if this process' executable file is in upper layer in overlayfs. This field value can only be trusted if the underlying kernel version is greater or equal than 3.18.0, since overlayfs was introduced at that time.
`proc.exe_ino`	INT64	The inode number of the executable image file on disk. Can be correlated with fd.ino.
`proc.exe_ino.ctime`	ABSTIME	Last status change time (ctime - epoch nanoseconds) of executable image file on disk (inode->ctime). Time is changed by writing or by setting inode information e.g. owner, group, link count, mode etc.
`proc.exe_ino.mtime`	ABSTIME	Last modification time (mtime - epoch nanoseconds) of executable image file on disk (inode->mtime). Time is changed by file modifications, e.g. by mknod, truncate, utime, write of more than zero bytes etc. For tracking changes in owner, group, link count or mode, use proc.exe_ino.ctime instead.
`proc.exe_ino.ctime_duration_proc_start`	ABSTIME	Number of nanoseconds between modifying status of executable image and spawning a new process using the changed executable image.
`proc.exe_ino.ctime_duration_pidns_start`	ABSTIME	Number of nanoseconds between pid namespace start ts and ctime exe file if pidns start predates ctime.
`proc.pidns_init_start_ts`	UINT64	Approximate start ts (epoch ns) of pid namespace (container or non container pid namespace).

Field Class: user

Information about the user executing the specific event.

Name	Type	Description
`user.uid`	UINT32	user ID.
`user.name`	CHARBUF	user name.
`user.homedir`	CHARBUF	home directory of the user.
`user.shell`	CHARBUF	user's shell.
`user.loginuid`	INT32	audit user id (auid).
`user.loginname`	CHARBUF	audit user name (auid).

Field Class: group

Information about the user group.

Name	Type	Description
`group.gid`	UINT32	group ID.
`group.name`	CHARBUF	group name.

Field Class: container

Container information. If the event is not happening inside a container, both id and name will be set to 'host'.

Name	Type	Description
`container.id`	CHARBUF	the container id.
`container.name`	CHARBUF	the container name.
`container.image`	CHARBUF	the container image name (e.g. falcosecurity/falco:latest for docker).
`container.image.id`	CHARBUF	the container image id (e.g. 6f7e2741b66b).
`container.type`	CHARBUF	the container type, eg: docker or rkt
`container.privileged`	BOOL	true for containers running as privileged, false otherwise
`container.mounts`	CHARBUF	A space-separated list of mount information. Each item in the list has the format ::::
`container.mount`	CHARBUF	Information about a single mount, specified by number (e.g. container.mount[0]) or mount source (container.mount[/usr/local]). The pathname can be a glob (container.mount[/usr/local/*]), in which case the first matching mount will be returned. The information has the format ::::. If there is no mount with the specified index or matching the provided source, returns the string "none" instead of a NULL value.
`container.mount.source`	CHARBUF	the mount source, specified by number (e.g. container.mount.source[0]) or mount destination (container.mount.source[/host/lib/modules]). The pathname can be a glob.
`container.mount.dest`	CHARBUF	the mount destination, specified by number (e.g. container.mount.dest[0]) or mount source (container.mount.dest[/lib/modules]). The pathname can be a glob.
`container.mount.mode`	CHARBUF	the mount mode, specified by number (e.g. container.mount.mode[0]) or mount source (container.mount.mode[/usr/local]). The pathname can be a glob.
`container.mount.rdwr`	CHARBUF	the mount rdwr value, specified by number (e.g. container.mount.rdwr[0]) or mount source (container.mount.rdwr[/usr/local]). The pathname can be a glob.
`container.mount.propagation`	CHARBUF	the mount propagation value, specified by number (e.g. container.mount.propagation[0]) or mount source (container.mount.propagation[/usr/local]). The pathname can be a glob.
`container.image.repository`	CHARBUF	the container image repository (e.g. falcosecurity/falco).
`container.image.tag`	CHARBUF	the container image tag (e.g. stable, latest).
`container.image.digest`	CHARBUF	the container image registry digest (e.g. sha256:d977378f890d445c15e51795296e4e5062f109ce6da83e0a355fc4ad8699d27).
`container.healthcheck`	CHARBUF	The container's health check. Will be the null value ("N/A") if no healthcheck configured, "NONE" if configured but explicitly not created, and the healthcheck command line otherwise
`container.liveness_probe`	CHARBUF	The container's liveness probe. Will be the null value ("N/A") if no liveness probe configured, the liveness probe command line otherwise
`container.readiness_probe`	CHARBUF	The container's readiness probe. Will be the null value ("N/A") if no readiness probe configured, the readiness probe command line otherwise
`container.start_ts`	UINT64	Approximate container start ts (epoch in ns) based on proc.pidns_init_start_ts.
`container.duration`	RELTIME	Number of nanoseconds since container.start_ts.

Field Class: fd

Every syscall that has a file descriptor in its arguments has these fields set with information related to the file.

Name	Type	Description
`fd.num`	INT64	the unique number identifying the file descriptor.
`fd.type`	CHARBUF	type of FD. Can be 'file', 'directory', 'ipv4', 'ipv6', 'unix', 'pipe', 'event', 'signalfd', 'eventpoll', 'inotify' or 'signalfd'.
`fd.typechar`	CHARBUF	type of FD as a single character. Can be 'f' for file, 4 for IPv4 socket, 6 for IPv6 socket, 'u' for unix socket, p for pipe, 'e' for eventfd, 's' for signalfd, 'l' for eventpoll, 'i' for inotify, 'b' for bpf, 'u' for userfaultd, 'r' for io_uring, 'o' for unknown.
`fd.name`	CHARBUF	FD full name. If the fd is a file, this field contains the full path. If the FD is a socket, this field contain the connection tuple.
`fd.directory`	CHARBUF	If the fd is a file, the directory that contains it.
`fd.filename`	CHARBUF	If the fd is a file, the filename without the path.
`fd.ip`	IPADDR	matches the ip address (client or server) of the fd.
`fd.cip`	IPADDR	client IP address.
`fd.sip`	IPADDR	server IP address.
`fd.lip`	IPADDR	local IP address.
`fd.rip`	IPADDR	remote IP address.
`fd.port`	PORT	matches the port (either client or server) of the fd.
`fd.cport`	PORT	for TCP/UDP FDs, the client port.
`fd.sport`	PORT	for TCP/UDP FDs, server port.
`fd.lport`	PORT	for TCP/UDP FDs, the local port.
`fd.rport`	PORT	for TCP/UDP FDs, the remote port.
`fd.l4proto`	CHARBUF	the IP protocol of a socket. Can be 'tcp', 'udp', 'icmp' or 'raw'.
`fd.sockfamily`	CHARBUF	the socket family for socket events. Can be 'ip' or 'unix'.
`fd.is_server`	BOOL	'true' if the process owning this FD is the server endpoint in the connection.
`fd.uid`	CHARBUF	a unique identifier for the FD, created by chaining the FD number and the thread ID.
`fd.containername`	CHARBUF	chaining of the container ID and the FD name. Useful when trying to identify which container an FD belongs to.
`fd.containerdirectory`	CHARBUF	chaining of the container ID and the directory name. Useful when trying to identify which container a directory belongs to.
`fd.proto`	PORT	matches the protocol (either client or server) of the fd.
`fd.cproto`	CHARBUF	for TCP/UDP FDs, the client protocol.
`fd.sproto`	CHARBUF	for TCP/UDP FDs, server protocol.
`fd.lproto`	CHARBUF	for TCP/UDP FDs, the local protocol.
`fd.rproto`	CHARBUF	for TCP/UDP FDs, the remote protocol.
`fd.net`	IPNET	matches the IP network (client or server) of the fd.
`fd.cnet`	IPNET	matches the client IP network of the fd.
`fd.snet`	IPNET	matches the server IP network of the fd.
`fd.lnet`	IPNET	matches the local IP network of the fd.
`fd.rnet`	IPNET	matches the remote IP network of the fd.
`fd.connected`	BOOL	for TCP/UDP FDs, 'true' if the socket is connected.
`fd.name_changed`	BOOL	True when an event changes the name of an fd used by this event. This can occur in some cases such as udp connections where the connection tuple changes.
`fd.cip.name`	CHARBUF	Domain name associated with the client IP address.
`fd.sip.name`	CHARBUF	Domain name associated with the server IP address.
`fd.lip.name`	CHARBUF	Domain name associated with the local IP address.
`fd.rip.name`	CHARBUF	Domain name associated with the remote IP address.
`fd.dev`	INT32	device number (major/minor) containing the referenced file
`fd.dev.major`	INT32	major device number containing the referenced file
`fd.dev.minor`	INT32	minor device number containing the referenced file
`fd.ino`	INT64	inode number of the referenced file
`fd.nameraw`	CHARBUF	FD full name raw. Just like fd.name, but only used if fd is a file path. File path is kept raw with limited sanitization and without deriving the absolute path.

Field Class: syslog

Content of Syslog messages.

Name	Type	Description
`syslog.facility.str`	CHARBUF	facility as a string.
`syslog.facility`	UINT32	facility as a number (0-23).
`syslog.severity.str`	CHARBUF	severity as a string. Can have one of these values: emerg, alert, crit, err, warn, notice, info, debug
`syslog.severity`	UINT32	severity as a number (0-7).
`syslog.message`	CHARBUF	message sent to syslog.

Field Class: fdlist

Poll event related fields.

Name	Type	Description
`fdlist.nums`	CHARBUF	for poll events, this is a comma-separated list of the FD numbers in the 'fds' argument, returned as a string.
`fdlist.names`	CHARBUF	for poll events, this is a comma-separated list of the FD names in the 'fds' argument, returned as a string.
`fdlist.cips`	CHARBUF	for poll events, this is a comma-separated list of the client IP addresses in the 'fds' argument, returned as a string.
`fdlist.sips`	CHARBUF	for poll events, this is a comma-separated list of the server IP addresses in the 'fds' argument, returned as a string.
`fdlist.cports`	CHARBUF	for TCP/UDP FDs, for poll events, this is a comma-separated list of the client TCP/UDP ports in the 'fds' argument, returned as a string.
`fdlist.sports`	CHARBUF	for poll events, this is a comma-separated list of the server TCP/UDP ports in the 'fds' argument, returned as a string.

Field Class: k8s

Kubernetes related context.

The set of fields k8s.ns.name and k8s.pod.* (e.g., k8s.pod.name) are populated with data fetched from the container runtime, so they don't require the Kubernetes Metadata Enrichment functionality to be enabled.

All the other fields will only be available when Falco also fetches the Kubernetes Metadata from the Kubernetes API server (-k Falco option) .

Name	Type	Description
`k8s.pod.name`	CHARBUF	Kubernetes pod name.
`k8s.pod.id`	CHARBUF	Kubernetes pod id.
`k8s.pod.label`	CHARBUF	Kubernetes pod label. E.g. 'k8s.pod.label.foo'.
`k8s.pod.labels`	CHARBUF	Kubernetes pod comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`k8s.rc.name`	CHARBUF	Kubernetes replication controller name.
`k8s.rc.id`	CHARBUF	Kubernetes replication controller id.
`k8s.rc.label`	CHARBUF	Kubernetes replication controller label. E.g. 'k8s.rc.label.foo'.
`k8s.rc.labels`	CHARBUF	Kubernetes replication controller comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`k8s.svc.name`	CHARBUF	Kubernetes service name (can return more than one value, concatenated).
`k8s.svc.id`	CHARBUF	Kubernetes service id (can return more than one value, concatenated).
`k8s.svc.label`	CHARBUF	Kubernetes service label. E.g. 'k8s.svc.label.foo' (can return more than one value, concatenated).
`k8s.svc.labels`	CHARBUF	Kubernetes service comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`k8s.ns.name`	CHARBUF	Kubernetes namespace name.
`k8s.ns.id`	CHARBUF	Kubernetes namespace id.
`k8s.ns.label`	CHARBUF	Kubernetes namespace label. E.g. 'k8s.ns.label.foo'.
`k8s.ns.labels`	CHARBUF	Kubernetes namespace comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`k8s.rs.name`	CHARBUF	Kubernetes replica set name.
`k8s.rs.id`	CHARBUF	Kubernetes replica set id.
`k8s.rs.label`	CHARBUF	Kubernetes replica set label. E.g. 'k8s.rs.label.foo'.
`k8s.rs.labels`	CHARBUF	Kubernetes replica set comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`k8s.deployment.name`	CHARBUF	Kubernetes deployment name.
`k8s.deployment.id`	CHARBUF	Kubernetes deployment id.
`k8s.deployment.label`	CHARBUF	Kubernetes deployment label. E.g. 'k8s.rs.label.foo'.
`k8s.deployment.labels`	CHARBUF	Kubernetes deployment comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.

Field Class: mesos

Mesos related context.

Name	Type	Description
`mesos.task.name`	CHARBUF	Mesos task name.
`mesos.task.id`	CHARBUF	Mesos task id.
`mesos.task.label`	CHARBUF	Mesos task label. E.g. 'mesos.task.label.foo'.
`mesos.task.labels`	CHARBUF	Mesos task comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`mesos.framework.name`	CHARBUF	Mesos framework name.
`mesos.framework.id`	CHARBUF	Mesos framework id.
`marathon.app.name`	CHARBUF	Marathon app name.
`marathon.app.id`	CHARBUF	Marathon app id.
`marathon.app.label`	CHARBUF	Marathon app label. E.g. 'marathon.app.label.foo'.
`marathon.app.labels`	CHARBUF	Marathon app comma-separated key/value labels. E.g. 'foo1:bar1,foo2:bar2'.
`marathon.group.name`	CHARBUF	Marathon group name.
`marathon.group.id`	CHARBUF	Marathon group id.

Field Class: span

Fields used if information about distributed tracing is available.

Name	Type	Description
`span.id`	INT64	ID of the span. This is a unique identifier that is used to match the enter and exit tracer events for this span. It can also be used to match different spans belonging to a trace.
`span.time`	CHARBUF	time of the span's enter tracer as a human readable string that includes the nanosecond part.
`span.ntags`	UINT32	number of tags that this span has.
`span.nargs`	UINT32	number of arguments that this span has.
`span.tags`	CHARBUF	dot-separated list of all of the span's tags.
`span.tag`	CHARBUF	one of the span's tags, specified by 0-based offset, e.g. 'span.tag[1]'. You can use a negative offset to pick elements from the end of the tag list. For example, 'span.tag[-1]' returns the last tag.
`span.args`	CHARBUF	comma-separated list of the span's arguments.
`span.arg`	CHARBUF	one of the span arguments, specified by name or by 0-based offset. E.g. 'span.arg.xxx' or 'span.arg[1]'. You can use a negative offset to pick elements from the end of the tag list. For example, 'span.arg[-1]' returns the last argument.
`span.enterargs`	CHARBUF	comma-separated list of the span's enter tracer event arguments. For enter tracers, this is the same as evt.args. For exit tracers, this is the evt.args of the corresponding enter tracer.
`span.enterarg`	CHARBUF	one of the span's enter arguments, specified by name or by 0-based offset. For enter tracer events, this is the same as evt.arg. For exit tracer events, this is the evt.arg of the corresponding enter event.
`span.duration`	RELTIME	delta between this span's exit tracer event and the enter tracer event.
`span.duration.human`	CHARBUF	delta between this span's exit tracer event and the enter event, as a human readable string (e.g. 10.3ms).

Field Class: evtin